Base Grain Leather Compound LRC45
Used to repair holes in leather, vinyl and hard plastics, replaces the grain where its been removed
The most effective heat cure base filler.
Our Base Grain Compound is used with a heat iron to create the base for holes in leather.
This product is used where holes are very big in leather to act a base grain prior to using the grain copier compound (LRC46), this is applied so its left below the surface so the grain copier can then be applied to represent the grain in the leathers surface.
Can also be used as a stand alone product to fill and grain holes in plastic trims.
Place the compound in to the hole to be fixed and then apply the Teflon paper over the top and heat with the heat iron until cured, depending on the size of the hole and atmospheric conditions will determine how long this will take to cure, once cured cool down with the cooling bar and then apply the grain copier compound LRC46, apply the grain copier pad over the grain copier compound, then place the Teflon paper over the surface and then heat with a heat iron until cured leaving the grain copied into the repair allowing the repair to be blended in.
Before colouring wipe over with alcohol cleaner.
Size: 50 ml tub
For Leather Grain Copying; To replicate the grain once the base grain has been used, you need the Grain Copier Compound
